- Joined
- Nov 13, 2016
- Messages
- 218
- Reaction score
- 257
- First Language
- Russian
- Primarily Uses
- N/A
Hello!
The following are some of the resources I am making for my game. These have been created from scratch by a combination of drawing, modeling, rendering and editing. I am using GIMP, BIMP, and Blender.
These tiles are meant to mimic RTP ones.
(I have older pixel-art-like / GIMP edits resources here: https://forums.rpgmakerweb.com/inde...sources-modern-day-for-tall-characters.72204/)
Terms and Conditions:
- Credit: Alastor01
- Commercial use: Allowed, please credit
- Non-commercial use: Allowed, please credit
- Edits: Allowed
- Re-post of edits: Allowed, please link back here
- Maker required: Any game engine (I will be using these graphics in Godot as well)
- Sources: Not provided yet
LATEST: 04/12/17 - added an example map
__________Map_Examples__________
This was actually made in GIMP. Only my graphics are being used The small parts above door openings were just cut from walls.
__________Balustrades__________
RTP remakes from Tile-set C.
__________Chairs__________
Chairs rendered from 8 angles. One or 2 tile high. Go to B C D tile-sets
__________Columns_And_Pillars__________
They are 3 tiles high, same as RTP Tile-set C
__________Floor_Auto_Tiles__________
(Note: these are neither tile-sets nor true auto-tiles, it is up to you to arrange them the way you want)
__________Ladders__________
Some wooden and metal ladders, 3 tiles high. I am getting better at lighting / material setup now.
For use in tile-sets B / C / D / E.
__________Stairs_Front_Tiles__________
These stairs are in A5 configuration. They mimic RTP style tiles in everything except shadows I just can't make them that pronounced...
__________Stairs_Side_Tiles__________
a) 1x1 Stairs
These stair tiles closely resemble the ones in Tile-set B. Unfortunately, you can not climb them, so they are only decorative.
b) 3x3 Stairs
Here is something more unique - a 3 by 3 side stairs. I tried to mimic the large stair in FSM - Town Of Beginnings DLC and I think its close enough... Also added a balustrade as an add-on - you need to put "star" pass-ability for that.
__________Tables__________
Go into Tile-set B / C / D
__________Wall_Side_Tiles__________
These tiles make only the the side of the wall. I want to have custom thin tops to have realistic walls with correct proportions. Can be used both as 2x1 B / C / D / E tiles as well as A4 auto-tiles (would require re-arrangement and top parts of the wall).
__________Wall_Top_Tiles__________
These are thin wall tops. They are very different from standard A4 auto-tile ones. Each set is manual one and contains 7 top tiles.
- Advantages: Unique, realistic, allow pass-ability underneath
- Disadvantages: Require 7 tile spaces per set, require manual placement (auto-tiles are impossible with such setup)
__________Wall_Add-Ons - Sides__________
These are wall pieces than can be added on top of wall side. Like a second layer. There are two ways you can use them:
a) Have them as separate B / C / D / E tiles you can add on top of a wall in map editor
b) Place them on top of wall sides using image editor - such walls can placed into A tile-sets as well
(These are arranged in auto-tile format for A4 wall sides. Upper and lower borders can be easily separated.)
The following are some of the resources I am making for my game. These have been created from scratch by a combination of drawing, modeling, rendering and editing. I am using GIMP, BIMP, and Blender.
These tiles are meant to mimic RTP ones.
(I have older pixel-art-like / GIMP edits resources here: https://forums.rpgmakerweb.com/inde...sources-modern-day-for-tall-characters.72204/)
Terms and Conditions:
- Credit: Alastor01
- Commercial use: Allowed, please credit
- Non-commercial use: Allowed, please credit
- Edits: Allowed
- Re-post of edits: Allowed, please link back here
- Maker required: Any game engine (I will be using these graphics in Godot as well)
- Sources: Not provided yet
LATEST: 04/12/17 - added an example map
__________Map_Examples__________
This was actually made in GIMP. Only my graphics are being used
The small parts above door openings were just cut from walls.__________Balustrades__________
RTP remakes from Tile-set C.
__________Chairs__________
Chairs rendered from 8 angles. One or 2 tile high. Go to B C D tile-sets
__________Columns_And_Pillars__________
They are 3 tiles high, same as RTP Tile-set C
__________Floor_Auto_Tiles__________
(Note: these are neither tile-sets nor true auto-tiles, it is up to you to arrange them the way you want)
__________Ladders__________
Some wooden and metal ladders, 3 tiles high. I am getting better at lighting / material setup now.
For use in tile-sets B / C / D / E.
__________Stairs_Front_Tiles__________
These stairs are in A5 configuration. They mimic RTP style tiles in everything except shadows
I just can't make them that pronounced...__________Stairs_Side_Tiles__________
a) 1x1 Stairs
These stair tiles closely resemble the ones in Tile-set B. Unfortunately, you can not climb them, so they are only decorative.
Here is something more unique - a 3 by 3 side stairs. I tried to mimic the large stair in FSM - Town Of Beginnings DLC and I think its close enough... Also added a balustrade as an add-on - you need to put "star" pass-ability for that.
__________Tables__________
Go into Tile-set B / C / D
__________Wall_Side_Tiles__________
These tiles make only the the side of the wall. I want to have custom thin tops to have realistic walls with correct proportions. Can be used both as 2x1 B / C / D / E tiles as well as A4 auto-tiles (would require re-arrangement and top parts of the wall).
__________Wall_Top_Tiles__________
These are thin wall tops. They are very different from standard A4 auto-tile ones. Each set is manual one and contains 7 top tiles.
- Advantages: Unique, realistic, allow pass-ability underneath
- Disadvantages: Require 7 tile spaces per set, require manual placement (auto-tiles are impossible with such setup)
__________Wall_Add-Ons - Sides__________
These are wall pieces than can be added on top of wall side. Like a second layer. There are two ways you can use them:
a) Have them as separate B / C / D / E tiles you can add on top of a wall in map editor
b) Place them on top of wall sides using image editor - such walls can placed into A tile-sets as well
Attachments
Last edited:
