When using yanflys event move core plugin i can pass through walls

Balendra

Veteran
Veteran
Joined
Mar 4, 2022
Messages
289
Reaction score
106
First Language
english
Primarily Uses
RMMV
this only happens when i move diaganolly also the walls passibility are on X so its not because i have set the passability settings wrong my character only goes through the walls when i move diaganol which is what this plugin enables but i cant disable it because it also allows you to make labels which i need to indicate what buildings are able to be entered and what ones are just for show
image_2022-08-08_194430070.png
 

Andar

Veteran
Veteran
Joined
Mar 5, 2013
Messages
37,315
Reaction score
10,176
First Language
German
Primarily Uses
RMMV
I doubt that it is the move core unless that plugin is installed wrong, but there are several other possible causes.

1) it might be that you have mixed up ceiling tiles with wall tiles. Ceiling tiles are intended to simulate a second (top) level on a single-level map, and have a special passability setting as a result.
Ceiling tiles are every second row on A4 with the tile directly below being the fitting wall tile, and you can walk from wall to ceiling if the wall has an override like a ladder tile.
This case is actually quite likely because the ceiling effect is even there when the tile is not intended to be walked on, and there are several similar looking tiles that are used for tops to help with a visual effect.

2) It can be a combination of several plugins that cause this, with the yanfly one being only one of the plugins involved.

3) on itself the yanfly plugins can only cause strange effects if they are installed wrong, especially in the wrong order.
 

Balendra

Veteran
Veteran
Joined
Mar 4, 2022
Messages
289
Reaction score
106
First Language
english
Primarily Uses
RMMV
I doubt that it is the move core unless that plugin is installed wrong, but there are several other possible causes.

1) it might be that you have mixed up ceiling tiles with wall tiles. Ceiling tiles are intended to simulate a second (top) level on a single-level map, and have a special passability setting as a result.
Ceiling tiles are every second row on A4 with the tile directly below being the fitting wall tile, and you can walk from wall to ceiling if the wall has an override like a ladder tile.
This case is actually quite likely because the ceiling effect is even there when the tile is not intended to be walked on, and there are several similar looking tiles that are used for tops to help with a visual effect.

2) It can be a combination of several plugins that cause this, with the yanfly one being only one of the plugins involved.

3) on itself the yanfly plugins can only cause strange effects if they are installed wrong, especially in the wrong order.
Well i dont think the wall tiles are celing tiles because when i downloaded them the tileset said dungeon_A4 and i will list the plugins i have installed so far and the order they are in
1UltraMode7
2Mog_ActorHud
3Cgmz_Fast_Travel (Disabled)
4VizuMZ_0_CoreEngine
5VizuMz_1_BattleCore
6 VizuMZ_1_EventsMoveCore
7 Cgmz_core
8Cgmz_encyclopedia
9cgmz_menucommandwindow
 

Andar

Veteran
Veteran
Joined
Mar 5, 2013
Messages
37,315
Reaction score
10,176
First Language
German
Primarily Uses
RMMV
when i downloaded them the tileset said dungeon_A4
half of the A4 tiles are always ceiling tiles, no matter what you place in A4.
that is by definition and cannot be changed.
so you basically told that the first case is the most likely here.
 

Balendra

Veteran
Veteran
Joined
Mar 4, 2022
Messages
289
Reaction score
106
First Language
english
Primarily Uses
RMMV
half of the A4 tiles are always ceiling tiles, no matter what you place in A4.
that is by definition and cannot be changed.
so you basically told that the first case is the most likely here.
Oh well then what can i do
 

Andar

Veteran
Veteran
Joined
Mar 5, 2013
Messages
37,315
Reaction score
10,176
First Language
German
Primarily Uses
RMMV
check which tiles you used, and if they are ceiling tiles replace them with wall tiles.

if the wall tiles do not have the image you want, you can use an image program to cut down the ceiling tile (2x3) to a wall tile (2x2) and move it to a wall tile position of the sheet.
 

Balendra

Veteran
Veteran
Joined
Mar 4, 2022
Messages
289
Reaction score
106
First Language
english
Primarily Uses
RMMV
check which tiles you used, and if they are ceiling tiles replace them with wall tiles.

if the wall tiles do not have the image you want, you can use an image program to cut down the ceiling tile (2x3) to a wall tile (2x2) and move it to a wall tile position of the sheet.
Ok do yk a program i could use or like a tutorial on how to do this
 

Andar

Veteran
Veteran
Joined
Mar 5, 2013
Messages
37,315
Reaction score
10,176
First Language
German
Primarily Uses
RMMV
basically anything other than Microsoft's paint, because that destroys transparency.

GIMP, Photoshop or paint.net are some of the more commonly mentioned programs.
 

Latest Threads

Latest Profile Posts

WhitePaper.jpg

From China, with...white paper. :kaojoy:
This is a really good video
Testing Parry/Counter system straight from Action Sequence instead of utilizing the default counter.
Quite happy with the result so far.
Bex
This just blew my mind.
RMMZ can choose Tilesize.
No complicated Plugin needed, it is a simple inbuild Option.
This means you could literally use all your rm2k3 or vx-ace Tilesets and Characktersets in RMMZ.
This also makes me curious about experimenting with smaler Tiles and higher Screen Resolutions for non RPG Games.
mztilesize1414564.png
Did you know about this?

Forum statistics

Threads
126,984
Messages
1,182,896
Members
166,840
Latest member
PeachyGlitch
Top